Syzmik’s new Rugged Cooling range of workwear changes the way cool workwear is developed. When we started to look for a better solution to heat stress we first had to understand the way the body cools itself which is primarily through the evaporation of sweat. So to aid the body in cooling, we set out to create a fabric that would increase breathability to not only keep the wearer cooler but also allow the body’s sweat to evaporate and dry quicker. The fabric we use is a 100% cotton that is produced in a square weave construction, the construction is a more open weave that allows the maximum amount of air to pass through the fabric.

Key Points of Rugged Cooling Fabric :
For us there is no point undertaking all this work unless we can prove categorically our product performs better, so we conducted rigorous testing to prove these claims. The result of all this development is a range that is not only cooler and more comfortable but also actually stronger than traditional workwear.

120% More breathability and 190% more tearing strength traditional work Shirts* (*Tested using method BS EN ISO 9237-1995 and AS 2001.2.10-1986 against 280gsm Cotton Drill).

Fabric :
100% Square Weave Cotton Ripstop - 145gsm.

Features :
Mesh venting to increase breathability in the under arm, upper back, front side seam and back side seam.
Mechanical stretch to give you more freedom of movement.
Tailored feminine fit.
2 Chest pockets with pen partition.
3M™ 8910 breathable reflective tape in hoop configuration.
Reinforced at all key stress points with bar tacks.

Standards :
Certified AS/NZS 4602.1.2011 High Visibility Class D/N Day/Night Standard Compliant.
Certified AS/NZS 1906.4.2010 High Visibility Class R/F Retro-reflective and Fluorescent Fabric Standard Compliant.
Certified AS/NZS 4399 Ultra Violet Protection Factor UPF50+ Standard Compliant.